The acrobee video system consists of a camera, Video Transmitter (VTX), is powered by and connected to the Flight Controller (FC). In order for this system to work all parts of the system must be working correctly.
Example of Normal operation
Here is a video showing normal working condition. Please note each flying environment will yield different results but this shows a baseline.
Description of Problem
In this section we will take a look at the OSD not working.
This can be caused by the VTX being turned off, or on the wrong band, or on the wrong channel, or there can be damage to a part of the system.
Sometimes the fix is as simple as making sure the pins on the VTX board and FC are aligned, it may be off by one pin causing this issue. Please verify the alignment of the VTX board on the FC.
Updating the firmware to the latest on our website can sometimes fix the problem.
If the font looks bad, this may fix the issue.
If you are still having issues, please submit a ticket with your order number and an explanation of the issue so we can assist you.