The Acrobee video system consists of a camera, Video Transmitter (VTX), is powered by and connected to the Flight Controller (FC). In order for this system to work all parts of the system must be working correctly.
Example of Normal operation
Here is a video showing normal working condition. Please note each flying environment will yield different results but this shows a baseline.
Description of Problem
In this section we will take a look at not seeing the video in your goggles
This can be caused by the VTX being off, or on the wrong band, or on the wrong channel, or there can be damage to a part of the system.
Some solutions to this are verifying your goggles and VTX are on the same band and channel. To do this go into CLI in betaflight and type “set” then press enter, this will list the VTX band, channel, and power. Please also make sure the VTX power is not set to “0”. Inspect the VTX board for damage, here is how it should look.
If you are still having issues, please submit a ticket with your order number and an explanation of the issue so we can assist you.